Can you coat a medical or dental suite without closing the practice?

Yes. Most clinical floors around Medlock Bridge and Technology Park are installed overnight or across a weekend. We grind and prep after hours, install the system, and a polyaspartic topcoat brings the floor back into service within hours rather than days. You get the exact return-to-service window before we start, so appointments can be scheduled around it.

Will the floor handle daily disinfecting?

It will. A properly installed resin floor is non-porous and chemically resistant, so routine cleaning agents and disinfectants sit on the surface without dulling or softening it. Because the finish is seamless, there are no grout lines or joints where residue can build up, which is what makes it suitable for clinical and laboratory spaces.

Can you coat a basement that will become a media room or gym?

That is one of the most common jobs we do in Johns Creek homes. We grind the slab, test it for moisture, then install a system chosen for the way the room will be used, with extra grip near a door or wet bar if you want it. The result is a sealed, dust-free floor you can put furniture, equipment or a screen in front of.

How much disruption should we expect at home?

The space has to be completely empty while we work, and grinding is dusty, so we run vacuum-assisted equipment to keep it contained. Most residential floors are a two-day job: preparation on the first day, coating on the second. We tell you when you can walk on the floor and when you can put weight back on it.

What does an epoxy floor cost in Johns Creek?

There is no flat rate we can give over the phone, because the price moves with the square footage, how much preparation the slab needs, and which system you pick. What we can do is come out, measure, test the concrete and talk through how the space will be used, then send a written price. That visit is free and carries no obligation.

Epoxy Flooring in Johns Creek, GA

Residential, Commercial and Industrial Epoxy Floors in Johns Creek

Homes, clinics and workplaces across Johns Creek, GA sit on concrete that has to earn its keep. Faust Flooring installs epoxy and polyaspartic coatings on residential, commercial and industrial slabs here, from finished basements and media rooms to the medical and dental suites around Medlock Bridge Road and the light industrial units near Johns Creek Technology Park.

Preparation decides how long a floor lasts. We diamond-grind the slab back to clean concrete, deal with cracks and moisture, then build the system up in layers suited to the room. Below is what we install in Johns Creek, the spaces each system fits, and the time each job takes.

Residential Epoxy Floors in Johns Creek, GA

Basements are the biggest opportunity in Johns Creek homes, and garages are a close second. Our epoxy garage floor systems in Johns Creek give you a hard, sealed surface that shrugs off oil, hot tire pickup and dropped tools, and cleans up with a mop.

Downstairs, a coated slab turns an unfinished basement into a media room, home gym, playroom or office. It stops concrete dust, handles the odd spill from a wet bar or fridge, and gives the whole level a finished look rather than a storage-room feel. We can match the color to the rest of the house and add extra grip wherever it is needed.

If you are finishing a lower level or upgrading a garage in Johns Creek, book a free onsite estimate. We will look at the concrete, recommend a system that fits how you use the room, and price it clearly before anything starts.

(770) 419-5864 Get your free quote

Flake epoxy floor in a finished Johns Creek, GA basement

What an epoxy floor does for your space

Stands up to heavy use

A resin floor handles foot traffic, rolling equipment and dropped tools without chipping.
That applies equally in a basement, a treatment room or a warehouse aisle.

Resists chemicals and stains

Oil, grease, cleaning products and disinfectants sit on the surface instead of soaking in. In a clinic that means daily sanitizing does not dull the floor, and in a garage it means a leak is not permanent.

Simple to keep clean

The surface is seamless and non-porous, so there is nowhere for dirt or bacteria to collect. A dust mop and an occasional wet mop are enough, with no waxing, stripping or annual resealing.

Customizable design

You can choose solid colors, flake blends, metallic pours or quartz builds.
We can match brand colors, lift the light level in a basement, or add line markings and logos where they help.

Moisture and slip resistance

We moisture-test the slab before quoting, and we can build texture into the finish so the floor stays safe when wet, around a sink, a wash bay or a basement door.

Costs less over the years

A properly prepared epoxy or polyaspartic floor lasts for years with very little upkeep, which usually costs less than replacing tile or vinyl, or patching bare concrete over and over.

Get a Free Estimate in Johns Creek

(770) 419-5864 Get your free quote

Outdoor Concrete Resurfacing in Johns Creek, GA

Patios, pool decks and driveways in Johns Creek take hard sun through the summer and heavy rain on top of it. Left bare, concrete cracks, fades and turns slick underfoot. Our outdoor concrete resurfacing in Johns Creek renews the surface using flake and quartz builds chosen for UV exposure, pooling water and grip.

The coatings are UV-stable so the color holds, and we finish them with enough texture to stay safe when wet. It is a practical upgrade for a pool surround, a screened porch or a driveway apron that has started to look tired. Ask for a free on-site estimate and we will tell you whether resurfacing or repair makes more sense.

(770) 419-5864 Get your free quote

Resurfaced pool deck concrete at a Johns Creek, GA home

Seamless commercial epoxy floor in a Johns Creek, GA medical suite

Commercial Epoxy Floors in Johns Creek, GA

A lot of commercial space in Johns Creek is medical, dental and laboratory work, and those floors have to be cleanable before they are anything else. We coat treatment rooms, labs, imaging suites and back-of-house areas around Medlock Bridge Road and Technology Park, along with salons, gyms, showrooms and offices. Our commercial epoxy floors are seamless, so there are no grout lines to scrub and nowhere for spills or bacteria to sit. The finish takes repeated disinfecting without breaking down.

Most commercial work runs overnight or across a weekend. A polyaspartic topcoat cures fast enough that a practice can close on Friday and see patients on Monday, so you do not lose clinic days. Contact us for a free on-site estimate and we will schedule the work around your opening hours.

(770) 419-5864 Get your free quote

Our epoxy floor systems in Johns Creek

An epoxy floor is never a single layer. Each system starts with a primer that keys into the ground slab, then a body coat carrying the color or the flake, then a topcoat that takes the wear. We usually specify polyaspartic for that topcoat because it cures in hours instead of days and holds its color in daylight. The four systems below cover nearly everything we install in Johns Creek, and each panel sets out the layers, the job time, and when the floor can be used again.

Solid Color Epoxy

The most traditional forms of epoxy floors consist of a primer, solid-colored epoxy or polyurea base coat and a clear epoxy or polyaspartic topcoat. Light reflective, these floors come in an array of color choices. Logos, glitter, and line markings can be incorporated into the floors.

Total layers 2-3
Total job time 1-2 days
Return to service as short as 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours.

Get your free quote

Epoxy Flake Floor System

A multi-layered system comprising an epoxy base coat and vinyl flake chips is sealed with either a quick-drying polyaspartic topcoat or a polyurethane topcoat. This system is water and weather-resistant, chip, scratch, chemical and stain-resistant. Ideal for use in residential garages, outdoor surfaces and in busy commercial settings.

Total layers 2-3.
Total job time: 1-2 days.
Return to service after 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours.

Get your free quote

Metallic Epoxy Floors

The most decorative and easily customizable 3D floor system on the market. It's a mixture of colored basecoat and metallic powder pigments, applied using different application techniques. These floors are always one-of-a-kind, stain, scratch and chip-resistant. Non-porous, light-reflective and easy to maintain and clean.

Total layers 3-4.
Total job time ~3-4 days.
Return to service after 16 hours top coat for foot traffic. Light traffic for 2 days. Heavy traffic 2-5 days.

Get your free quote

Quartz Epoxy Floors

This multi-layered system consists of an epoxy basecoat, epoxy quartz granules, and is sealed with a protective topcoat. Extremely durable, stain, chemical, scratch and chip resistant. Weather and waterproof. It is ideal for outdoor settings and industrial/commercial settings that experience constant access to water, moisture and heavy traffic.

Total layers 3-4, depending on single or double broadcast.
Total job time can be up to 4 days, depending on the products chosen and single or double broadcast.
Return to service as short as 2-4 hours for foot traffic and heavy traffic 48-72 hours.

Get your free quote

Industrial Epoxy Floors in Johns Creek, GA

Warehouses, workshops, plant rooms and storage bays need a floor built for constant use. Our industrial epoxy floor systems services in Johns Creek stand up to forklifts, pallet jacks, racking and steady foot traffic without breaking up, and they keep dust down in the process.

We can lay in walkways, bay lines and safety markings while the floor is going down, which makes a working unit easier to run and safer to move around. Contact Faust Flooring today for a free on-site floor estimate. We will inspect the space, assess the condition of the concrete, and recommend the right system for the work you do.

(770) 419-5864 Get your free quote

Industrial epoxy floor in a Johns Creek, GA warehouse unit

Custom Epoxy Countertop Installation in Johns Creek, GA

Epoxy is not only for floors. We also pour custom epoxy countertops in Johns Creek for kitchens, islands, butler's pantries and basement bars. Finishes run from quiet solid tones to marble-look pours, and they cost a fraction of natural stone while giving you far more say in how the finished surface looks.

We settle the color and pattern with you first, then pour to fit the run of the counter, so a long island comes out as one continuous surface with no seams. Epoxy countertops are durable, heat-resistant, non-porous, and easy to clean, so a busy kitchen counter takes hot pans, spills and daily wiping without needing to be sealed.

If we are already coating a basement or garage floor for you, the countertops can usually be poured on the same visit. Mention both when you book the free estimate and we will price them together.

(770) 419-5864 Get your free quote

Custom epoxy countertop installed in a Johns Creek, GA kitchen

Why Choose Faust Flooring in Johns Creek, GA?

We work across Johns Creek from our base in Marietta, close enough to respond quickly before, during and after an installation. You deal with Faust Flooring directly from the first site visit to the final walkthrough, which means a single point of contact and workmanship that stays consistent from start to finish.

Preparation done right

Every slab is diamond-ground and moisture-tested before we quote. Rushing that step is the single most common reason a coating fails.

Systems chosen for the room

We pick flake, solid color, metallic or quartz for the traffic and conditions the floor will actually see, not for what installs quickest.

A straight read on the concrete

Where a slab needs moisture mitigation or crack repair, that work is identified at the estimate and written into the quote, not raised once the job has started.

Epoxy Flooring in Johns Creek, GA

Residential, Commercial and Industrial Epoxy Floors in Johns Creek

Residential Epoxy Floors in Johns Creek, GA