Can you install a floor in a Canton Street restaurant without closing for long?

Yes. Most restaurant and retail floors in the historic district go in overnight or across a weekend. We grind and prep after close, install the system, and a polyaspartic topcoat brings the floor back into service within hours. We confirm the exact return-to-service window before we start, so you can plan deliveries and staffing around it.

Our building is old and the concrete is uneven. Can it still take a coating?

In most cases yes. Old slabs are normal work for us in Roswell. We grind back to sound concrete, repair cracks and holes, and where a floor has a genuine dip we can level it before coating. What matters is finding that out at the estimate rather than halfway through, which is why we inspect the slab properly before quoting.

Will a coating trap moisture in a basement or below-grade room?

That is the right question to ask, and it is why we moisture-test first. If the reading is high we install a moisture-mitigation primer beneath the system so vapor pressure has somewhere to go. Coating a damp slab without that step is what causes bubbling and peeling later, so we price the mitigation in rather than leaving it out.

How long does an epoxy floor last?

A properly prepared residential floor runs well past ten years, and a commercial floor depends on the traffic it takes. Preparation is the deciding factor. A floor ground back to clean concrete and built up in layers lasts, while one applied over a sealed or dusty slab starts lifting within a year or two.

What does an epoxy floor cost in Roswell?

Every floor is priced on its own, since the area, the condition of the slab and the system you choose all affect it, and older buildings often need more preparation than newer ones. Book the free on-site estimate and we will measure, test the concrete, and put a written price together with no obligation to go ahead.

Epoxy Flooring in Roswell, GA

Residential, Commercial and Industrial Epoxy Floors in Roswell

Homes and businesses in Roswell, GA work off concrete that is rarely new. Faust Flooring installs epoxy and polyaspartic coatings on residential, commercial and industrial slabs across the city, from basements and garages in the neighborhoods off Houze Road to the shops and restaurants along Canton Street and the converted mill buildings by Vickery Creek.

Older concrete is not a problem, but it does have to be read properly. We grind every slab back to sound material, repair cracks, and moisture-test before quoting, because what sits under the coating decides how long the coating lasts. Below is what we install in Roswell, which spaces each system suits, and how long the work takes.

Residential Epoxy Floors in Roswell, GA

Garages and basements are the two spaces we coat most in Roswell homes. Our epoxy garage floors in Roswell seal the slab against oil, hot tire pickup and dropped tools, and they wipe clean rather than staining. Flake blends work particularly well on older slabs, because the texture disguises minor imperfections that a solid color would highlight.

In a basement, a coated floor stops concrete dust, copes with damp far better than bare slab, and turns a lower level into a gym, workshop, office or playroom. We can add grip near a door or utility area and carry the color through from the rest of the house.

Upgrading a garage or finishing a basement in Roswell? Book the free onsite estimate. We will assess the concrete, recommend the right system for the space, and give you a clear price before any work starts.

(770) 419-5864 Get your free quote

Flake epoxy garage floor in a Roswell, GA home

What an epoxy floor gives a Roswell property

Built for constant use

A resin floor takes foot traffic, rolling loads and dropped tools without chipping.
It performs the same way in a basement, a restaurant kitchen or a storage bay.

Resists spills and chemicals

Oil, grease, cleaning products and food spills sit on the surface until they are wiped up, instead of soaking into the concrete and leaving a permanent mark.

Easy to keep clean

The finish is seamless and non-porous, so dirt has nowhere to settle and there are no grout lines to scrub. A dust mop and an occasional wet mop is all it takes.

Customizable design

Flake blends, solid colors, metallic pours and quartz builds are all on the table.
That matters in a historic-district storefront, where the floor needs to suit the room rather than fight it.

Moisture control and grip

We moisture-test the slab before quoting, and we can build texture into the finish so the floor stays safe underfoot around an entry, a dish pit or a basement door.

Lower cost over time

A properly prepared epoxy or polyaspartic floor lasts for years with very little upkeep, which usually costs less than repeatedly patching old concrete or replacing tile.

Get a Free Estimate in Roswell

(770) 419-5864 Get your free quote

Outdoor Concrete Resurfacing in Roswell, GA

Pool decks, patios, porches and driveways in Roswell take full sun, heavy summer storms and a freeze-thaw cycle each winter. Bare concrete responds by cracking, fading and turning slick. Our outdoor concrete resurfacing in Roswell brings the surface back with flake and quartz builds specified for UV exposure, pooling water and grip underfoot.

These coatings add UV protection so the color does not fade in the sun, and a textured finish that keeps footing safe when the surface is wet. It suits a pool surround, a shaded walkway or a driveway apron that has started to look tired. Book a free on-site estimate and we will let you know if the slab needs repair first.

(770) 419-5864 Get your free quote

Resurfaced pool deck concrete at a Roswell, GA property

Seamless commercial epoxy floor in a Roswell, GA restaurant on Canton Street

Commercial Epoxy Floors in Roswell, GA

Canton Street is where most of our Roswell commercial work happens: restaurants, bars, coffee shops and retail in buildings that have already been through several fit-outs. We also coat salons, gyms, clinics and offices around the historic district and in the converted mill spaces. Our commercial epoxy floors are seamless, so there are no grout lines to scrub and nowhere for spills to collect, and they go down over old concrete once it has been prepared properly.

Most of this work runs overnight or across a weekend. A polyaspartic topcoat cures fast enough that a restaurant can close on Sunday and open on Tuesday, so you do not lose trading days. Ask us for a free on-site estimate and we will book the work around your busiest shifts.

(770) 419-5864 Get your free quote

Our epoxy floor systems in Roswell

An epoxy floor is never a single product. Each system is a primer that keys into the ground slab, a body coat carrying the color or the flake, and a topcoat that takes the wear. Polyaspartic is our usual topcoat because it cures in hours rather than days and holds its color in sunlight. The four systems below cover nearly everything we install in Roswell, with the layers, the job time and the return-to-service for each.

Solid Color Epoxy

The most traditional forms of epoxy floors consist of a primer, solid-colored epoxy or polyurea base coat and a clear epoxy or polyaspartic topcoat. Light reflective, these floors come in an array of color choices. Logos, glitter, and line markings can be incorporated into the floors.

Total layers 2-3
Total job time 1-2 days
Return to service as short as 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours.

Get your free quote

Epoxy Flake Floor System

A multi-layered system comprising an epoxy base coat and vinyl flake chips is sealed with either a quick-drying polyaspartic topcoat or a polyurethane topcoat. This system is water and weather-resistant, chip, scratch, chemical and stain-resistant. Ideal for use in residential garages, outdoor surfaces and in busy commercial settings.

Total layers 2-3.
Total job time: 1-2 days.
Return to service after 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours.

Get your free quote

Metallic Epoxy Floors

The most decorative and easily customizable 3D floor system on the market. It's a mixture of colored basecoat and metallic powder pigments, applied using different application techniques. These floors are always one-of-a-kind, stain, scratch and chip-resistant. Non-porous, light-reflective and easy to maintain and clean.

Total layers 3-4.
Total job time ~3-4 days.
Return to service after 16 hours top coat for foot traffic. Light traffic for 2 days. Heavy traffic 2-5 days.

Get your free quote

Quartz Epoxy Floors

This multi-layered system consists of an epoxy basecoat, epoxy quartz granules, and is sealed with a protective topcoat. Extremely durable, stain, chemical, scratch and chip resistant. Weather and waterproof. It is ideal for outdoor settings and industrial/commercial settings that experience constant access to water, moisture and heavy traffic.

Total layers 3-4, depending on single or double broadcast.
Total job time can be up to 4 days, depending on the products chosen and single or double broadcast.
Return to service as short as 2-4 hours for foot traffic and heavy traffic 48-72 hours.

Get your free quote

Custom Epoxy Countertop Installation in Roswell, GA

Epoxy is not only for floors. We also pour custom epoxy countertops in Roswell for kitchens, bars, bathrooms and reception desks. Finishes range from quiet solid tones to marble and stone-inspired pours, with far more control over color and pattern than natural stone allows.

These countertops are heat-resistant, non-porous, and easy to clean, so they handle daily use without sealing or special care. It is a practical way to lift a kitchen or a bar without paying stone prices.

Having a floor done at the same time usually means we can pour the countertops on the same visit, so ask about both at the estimate.

(770) 419-5864 Get your free quote

Custom epoxy countertop installed in a Roswell, GA kitchen

Industrial epoxy floor in a Roswell, GA workshop

Industrial Epoxy Floors in Roswell, GA

Behind the storefronts there is a working side to Roswell, and our industrial epoxy floor systems go into workshops, storage bays, plant rooms and the back-of-house areas of restaurants and production spaces in Roswell, where the floor has to take equipment, deliveries and regular wash-downs without breaking up.

We can add walkways, bay lines and safety markings as the floor goes down, and specify extra grip where water is a regular presence. Contact Faust Flooring today for a free on-site floor estimate. We will check the slab for moisture and movement, then recommend the system that fits the way you use the space.

(770) 419-5864 Get your free quote

Why Choose Faust Flooring in Roswell, GA?

At Faust Flooring, we cover Roswell from our base in Marietta, close enough to respond quickly before, during and after an installation. You work directly with our own team from the first site visit to the final walkthrough, which means one point of contact and consistent workmanship, with straight answers about what the slab needs.

Preparation done properly

Every slab gets diamond-ground and moisture-tested before a price goes out. On older Roswell concrete that step matters more, not less.

Systems matched to the space

We choose flake, solid color, metallic or quartz for the traffic and conditions the floor will take, not for what installs quickest.

A straight read on the concrete

Anything the slab needs first, whether that is mitigation or crack repair, is identified during the estimate and priced there, not discovered later.

Epoxy Flooring in Roswell, GA

Residential, Commercial and Industrial Epoxy Floors in Roswell

Residential Epoxy Floors in Roswell, GA