Can you coat a warehouse floor while we keep operating?

Usually yes, by working in sections. We close off part of the floor, grind and coat it, then move on once it has cured enough to take traffic. That takes longer overall than closing the unit, but it keeps you running. For a full shutdown we can often turn a whole floor around over a weekend, and we confirm the return-to-service times for foot and forklift traffic before we start.

Will the floor stand up to forklifts and pallet jacks?

Yes, provided the system is specified for it. Forklift wheels and racking legs concentrate a lot of weight into a small area, so we build those floors thicker and choose a harder-wearing system than we would for a home garage. Tell us what runs across the floor and where the racking sits, and we will specify accordingly.

Our slab is old, cracked and covered in oil. Is it worth coating?

In most cases it is. Oil has to be drawn out and the surface ground back before anything goes down, and cracks and joints are repaired as part of the preparation. An old industrial slab in poor condition is normal work for us. What we will not do is coat over contamination and let it fail, so if a section needs more than grinding we will tell you at the estimate.

How long before we can use the floor again?

With a polyaspartic topcoat, light foot traffic is usually possible within a few hours of the final coat. Heavier traffic, vehicles and racking need longer, generally forty-eight to seventy-two hours depending on the system. You get the exact figures for your floor in writing before the job starts.

Do you charge for travel in Cobb County?

No. We are based in Marietta, so there is no travel charge for work in the city or the surrounding Cobb County area, and it is easy for us to come back if you need us after the installation. The free on-site estimate covers inspecting the concrete, recommending a system, and giving you a clear written price.

Epoxy Flooring in Marietta, GA

Residential, Commercial and Industrial Epoxy Floors in Marietta

Concrete takes a beating in Marietta, from home garages off Roswell Road to the warehouses and production floors along Pickens Industrial Drive. At Faust Flooring we install epoxy and polyaspartic coatings on residential, commercial and industrial slabs right across Cobb County. The system we specify depends on what the floor has to carry and the conditions it works in, not on what is quickest to lay down.

Every job starts the same way. We diamond-grind the slab back to sound concrete, repair cracks and pitting, and test for moisture before we quote. That preparation is what decides whether a floor is still intact in ten years. Below you will find what we install in Marietta, which spaces each system suits, and how long the work takes.

Residential Epoxy Floors in Marietta, GA

In Marietta homes the garage usually comes first and the basement is a close second. Our epoxy garage floor coatings seal the slab against oil, hot tire pickup and dropped tools, and they wipe clean rather than staining. Flake blends hide small imperfections in an older slab, which suits the mixed housing stock around here, while solid colors give a newer garage a cleaner, more finished look.

Basements benefit just as much. A coated slab keeps concrete dust out of the air, handles spills without marking, and turns an unfinished lower level into a home gym, workshop, playroom or office. We can add extra grip wherever a floor gets wet, around a utility sink, a basement door or a laundry area, and match the color to the rest of the house.

Upgrading a garage or finishing a basement in Marietta? Ask for the free onsite estimate. We will check the concrete, suggest the system that suits the space, and give you a clear price up front.

(770) 419-5864 Get your free quote

Flake epoxy garage floor in a Marietta, GA home

What an epoxy floor gives a working space

Takes industrial punishment

A resin floor stands up to forklift traffic, pallet jacks, rolling racks and dropped tooling without chipping or spalling.
The same system scaled down works just as well in a home garage or a basement workshop.

Resists oil, chemicals and stains

Hydraulic fluid, cutting oil, grease, solvents and cleaning products sit on the surface until they are wiped up, instead of soaking into the slab and leaving a permanent mark.

Low maintenance

The finish is seamless and non-porous, so dust and grit have nowhere to settle. A dust mop and an occasional wet mop keep it right, with no waxing, stripping or resealing to schedule.

Customizable design

Solid colors, flake blends, metallic pours and quartz systems are all available.
We can match brand colors, mark out walkways and bays, brighten a dark unit, or add a logo at reception.

Moisture control and slip resistance

We moisture-test the slab before quoting, and we can build texture into the finish so the floor stays safe underfoot around loading doors, wash bays and anywhere water collects.

Lower cost across its life

A properly prepared epoxy or polyaspartic floor runs for years with very little upkeep, which usually costs less than repeatedly patching bare concrete or replacing tile in a working space.

Get a Free Estimate in Marietta

(770) 419-5864 Get your free quote

Outdoor Concrete Resurfacing in Marietta, GA

Patios, porches, pool decks and driveways in Marietta face full summer sun, heavy storms and a freeze-thaw cycle every winter. Left bare, concrete answers that by cracking, fading and turning slick. That is where our epoxy flake and quartz resurfacing systems come in, rebuilding the surface with finishes rated for sunlight, standing water and slip resistance.

These coatings provide UV protection to prevent fading, a textured finish that stays safe when wet, and a color that holds its tone season after season. It is a practical upgrade for a back patio, a pool surround or a driveway apron that has started to look tired. Ask for a free on-site estimate and we will tell you honestly whether resurfacing or repair is the better option.

(770) 419-5864 Get your free quote

Resurfaced pool deck concrete at a Marietta, GA property

Seamless commercial epoxy floor in a Marietta, GA business

Commercial Epoxy Floors in Marietta, GA

Marietta businesses run the full range, from restaurants and shops around the Square to medical offices, gyms, showrooms and service counters along Cobb Parkway. Our commercial epoxy floors are seamless, so there are no grout lines to scrub and nowhere for spills to collect, and they hold a professional finish under constant foot traffic.

Epoxy floors resist spills, chemicals and heavy equipment, which keeps a workspace cleaner and safer. Most commercial work happens after hours or across a weekend, and a polyaspartic topcoat cures fast enough that a unit can close on Friday and open on Monday. Contact us for a free on-site estimate and we will build the schedule around your trading hours.

(770) 419-5864 Get your free quote

Industrial Epoxy Floors in Marietta, GA

Marietta has real industry behind it, and industrial floors are the work we do most here. Our industrial epoxy floor systems go into warehouses, manufacturing units, workshops and plant rooms across Cobb County, including the industrial park off Pickens Industrial Drive. They are built to carry forklifts, pallet trucks, racking legs and constant foot traffic without breaking up.

We can lay in bay lines, walkways and safety markings while the floor is going down, which keeps a working unit organized and easier to run. For loading docks and wash-down areas we add texture and specify a system that copes with water and chemical exposure. Contact Faust Flooring today for a free on-site floor estimate. Our shop is here in Marietta, so we can come out quickly, look at the slab, and price the work with no travel charge in Cobb County.

(770) 419-5864 Get your free quote

Industrial epoxy floor in a Marietta, GA warehouse

Custom epoxy countertop installed in a Marietta, GA kitchen

Custom Epoxy Countertop Installation in Marietta, GA

Epoxy is not only for floors. We also pour custom epoxy countertops in Marietta for home kitchens, bar tops, breakrooms and service counters. Finishes range from plain solid colors to marble-look pours, and because the surface is poured in place there is no seam where two slabs would otherwise meet.

We agree the color and finish before anything is poured, and since our shop is here in Marietta you are welcome to stop in and handle a sample first. Epoxy countertops are durable, heat-resistant, non-porous, and easy to clean, so a counter in a busy kitchen or breakroom wipes clean and never needs resealing.

If we are already coating a garage, shop or warehouse floor for you, the counters can usually be poured during the same visit. Ask about both when you book the free estimate.

(770) 419-5864 Get your free quote

Why Choose Faust Flooring in Marietta, GA?

Faust Flooring is based in Marietta, so we are a few minutes away rather than a few counties. That makes it easy to come out and look at a slab, easy to come back if you have a question after the job, and it means no travel charge inside Cobb County. You work directly with our own team from the first site visit to the final walkthrough, so you get one point of contact and consistent workmanship the whole way through.

Preparation done properly

Every slab is diamond-ground and moisture-tested before we give a price. Rushing that step is the most common reason a coating fails early.

Systems matched to the work

We specify flake, solid color, metallic or quartz for the traffic and conditions the floor will actually take, not for what is fastest to install.

A straight read on the concrete

Where the concrete needs mitigation or repair before coating, that shows up in the estimate with a price against it, so nothing lands on you mid-job.

Epoxy Flooring in Marietta, GA

Residential, Commercial and Industrial Epoxy Floors in Marietta

Residential Epoxy Floors in Marietta, GA