Epoxy floor coating installed in a Decatur, GA garage

Residential, Commercial and Industrial Epoxy Floors in Decatur

Homes and businesses in Decatur, GA ask a lot of their concrete floors. Faust Flooring installs epoxy and polyaspartic coatings on residential, commercial and industrial slabs across the city, from basements in Oakhurst and Winnona Park to restaurant and taproom kitchens near the square, and workshop floors along the rail corridor.

Preparation is what separates a floor that lasts from one that peels. We diamond-grind every slab back to sound concrete, repair cracks and pitting, then build the coating up in layers chosen for the room. Below you will find what we install in Decatur, which spaces each system suits, and how long the work takes.

Residential Epoxy Floors in Decatur, GA

Two spaces come up again and again in Decatur homes: the basement and the garage. Our garage floor coatings in Decatur go down over concrete that has been properly ground and repaired first, which is what makes the bond hold under hot tires, dropped tools and daily traffic.

Basements are where a coating makes the biggest difference. Plenty of Decatur houses have lower levels that were never finished, and a bare slab there means concrete dust on everything and a room nobody really uses.

Epoxy seals that slab, wipes clean after a spill, and turns the space into a home gym, office, playroom or laundry room. We can add extra grip where it helps, around a basement door or a utility sink, and match the color to the rest of the house. If you are finishing a basement or upgrading a garage in Decatur, we offer a free onsite estimate to inspect the concrete, recommend the right system, and give you a clear price before the work begins.

Flake epoxy garage floor in a Decatur, GA home

What you get from an epoxy floor

Built for daily use

A resin floor takes foot traffic, rolling carts and dropped tools without chipping or denting.
That holds true on a basement floor, a kitchen line or a workshop bay.

Resists spills and chemicals

Oil, grease, cleaning products and food spills sit on the surface until they are wiped away. In a commercial kitchen that matters for hygiene, and in a garage it means an oil drip is no longer permanent.

Quick to clean

The finish is seamless and non-porous, so there are no grout lines or open pores for dirt to settle into. A dust mop and an occasional wet mop keep it looking right, with no waxing, stripping or resealing.

Customizable design

Solid colors, decorative flake blends, metallic pours and quartz systems are all available.
We can match brand colors, brighten a dark basement, or add line markings and a logo where you need them.

Moisture control and grip

We test the slab for moisture before we quote, and we can build texture into the finish so the floor stays safe underfoot when it is wet, around a dish pit, a wash bay or a basement entry.

Lower cost over time

A properly prepared epoxy or polyaspartic floor runs for years with almost no upkeep. That usually works out cheaper than replacing tile or vinyl, or patching bare concrete over and over.

Get a Free Estimate in Decatur

Outdoor Concrete Resurfacing in Decatur, GA

Patios, porches, driveways and pool decks in Decatur take full sun, heavy summer storms and a freeze-thaw cycle every winter. Left bare, concrete answers that by cracking, fading and turning slick. Our outdoor concrete resurfacing in Decatur rebuilds the surface with flake and quartz systems rated for sunlight, standing water and slip resistance.

These coatings add UV protection so the color holds its tone, and a textured finish so the surface stays safe when wet. It is a practical upgrade for a back patio, a front porch, or a driveway apron that has started to look tired. Ask for a free onsite estimate and we will tell you honestly whether resurfacing or repair is the better call.

Resurfaced pool deck concrete at a Decatur, GA property
Seamless commercial epoxy floor in a Decatur, GA restaurant kitchen

Commercial Epoxy Floors in Decatur, GA

Decatur runs on small businesses, and a lot of them serve food. Restaurants and breweries around the square, coffee shops and bakeries on College Avenue, salons, gyms and clinics all need a floor that passes inspection and still looks right in front of customers. Our commercial epoxy floors go down as one continuous surface, with no grout joints for grease and spills to work into. We can also run cove base up the wall so the floor-to-wall joint cleans in a single pass, which is exactly what a health inspector looks for.

Most commercial work happens overnight or across a weekend. A polyaspartic topcoat cures fast enough that a kitchen can close on Friday and open on Monday, so you do not lose trading days. Contact us for a free on-site estimate and we will build the schedule around your opening hours.

Our epoxy floor systems in Decatur

No epoxy floor is a single layer. Every system we install is built from a primer that bonds into the ground slab, a body coat that carries the color or the flake, and a topcoat that takes the wear. Polyaspartic is our usual choice for that topcoat because it cures in hours rather than days and keeps its color in sunlight. The four systems below cover nearly everything we install in Decatur. Each panel lists the layers involved, how long the job takes, and when you can use the floor again.

Solid Color Epoxy

The most traditional forms of epoxy floors consist of a primer, solid-colored epoxy or polyurea base coat and a clear epoxy or polyaspartic topcoat. Light reflective, these floors come in an array of color choices. Logos, glitter, and line markings can be incorporated into the floors.

Total layers 2-3
Total job time 1-2 days
Return to service as short as 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours. 

Epoxy Flake Floor System

A multi-layered system comprising an epoxy base coat and vinyl flake chips is sealed with either a quick-drying polyaspartic topcoat or a polyurethane topcoat. This system is water and weather-resistant, chip, scratch, chemical and stain-resistant. Ideal for use in residential garages, outdoor surfaces and in busy commercial settings.

Total layers 2-3.
Total job time: 1-2 days.
Return to service after 2-4 hours of top coat for light traffic and heavy traffic 48-72 hours. 

Metallic Epoxy Floors

The most decorative and easily customizable 3D floor system on the market. It's a mixture of colored basecoat and metallic powder pigments, applied using different application techniques. These floors are always one-of-a-kind, stain, scratch and chip-resistant. Non-porous, light-reflective and easy to maintain and clean.

Total layers 3-4.
Total job time ~3-4 days.
Return to service after 16 hours top coat for foot traffic. Light traffic for 2 days. Heavy traffic 2-5 days. 

Quartz Epoxy Floors

This multi-layered system consists of an epoxy basecoat, epoxy quartz granules, and is sealed with a protective topcoat. Extremely durable, stain, chemical, scratch and chip resistant. Weather and waterproof. It is ideal for outdoor settings and industrial/commercial settings that experience constant access to water, moisture and heavy traffic.

Total layers 3-4, depending on single or double broadcast.
Total job time can be up to 4 days, depending on the products chosen and single or double broadcast.
Return to service as short as 2-4 hours for foot traffic and heavy traffic 48-72 hours. 

Custom Epoxy Countertop Installation in Decatur, GA

Epoxy is not only for floors. We also pour custom epoxy countertops in Decatur for kitchens, bars, bathrooms and reception desks. Colors and finishes run from quiet solid tones to marble and stone-inspired pours, and because each one is poured by hand, no two come out exactly alike.

The finished surface is heat-resistant, non-porous, and easy to clean, so it handles everyday use without sealing or special care. It is a straightforward way to give a kitchen or a bar a high-end look without paying for natural stone.

If we are already installing a floor for you, we can usually complete the countertops on the same visit. Ask about both when you book your free estimate.

Custom epoxy countertop installed in a Decatur, GA kitchen
Industrial epoxy floor in a Decatur, GA workshop

Industrial Epoxy Floors in Decatur, GA

Workshops, storage bays, plant rooms and back-of-house areas need a floor that stands up to constant use. Our industrial epoxy floor systems in Decatur are built for that: hard-wearing coatings that take forklifts, pallet jacks, tool carts and heavy foot traffic without breaking down.

We can add walkways, bay lines and safety markings while the floor is going in, which keeps a working space organized and easy to move around. For food and drink production, a seamless coating with cove base also makes wash-downs faster. Contact Faust Flooring today for a free on-site floor estimate. We will inspect the space, assess the condition of the concrete, and recommend the best system for the work you do.

Why Choose Faust Flooring in Decatur, GA?

At Faust Flooring, we serve Decatur homeowners and business owners from our base in Marietta, close enough to respond quickly before, during and after an installation. You work directly with our own team from the first visit to the final walkthrough, which means one point of contact, consistent workmanship, and straight answers at every stage.

Preparation you can see

Every slab is diamond-ground and moisture-tested before we give you a price. Coatings fail when that step gets rushed, so we do not rush it.

The right system for the room

We specify flake, solid color, metallic or quartz based on the traffic and the conditions in that space, not on what is quickest to lay down.

An honest read on the slab

If the concrete needs moisture mitigation or crack repair first, we say so before you commit and we include it in the price.

Clear scheduling

You get a firm quote, a confirmed start date, and a crew that cleans up before it leaves.

Decatur Epoxy Flooring Questions

Can you coat a restaurant kitchen without closing for a week?
My basement is in an older Decatur house and feels damp. Can it still be coated?
Does an epoxy floor meet health code requirements?
How long will an epoxy floor last?
What does an epoxy floor cost in Decatur?

We're a Step Above the Rest!

Read what our clients have to say

“We hired Faust Flooring to grind and seal the floors of our coffee shop expansion. From the initial phone call, to estimation then completion was about a week- maybe slightly over. They were very efficient, great at communicating and showed great care and intentionality in helping us with this aspect of our renovation— all at a very reasonable price! I’ve already recommended them to friends for future work. Highly Recommended!”

andrew beatton — 5 out of 5 stars

“I am a local realtor in the Marietta area and I have used Fausto several times. I have used him on my personal home and was so happy with the wood floor results that I refer them on a regular basis to all of my clients. So far everyone has had a great experience and outcome. He is definitely my first call for flooring on a regular basis.”

carolyn fern — 5 out of 5 stars

“Faust did an outstanding job repairing and refinishing the floor of my house in Canton, GA. Looked better than new. Great communication and crew were punctual and left the area spotless and end of the job. Highly recommend!”

Randal Carter — 5 out of 5 stars

“The level of expertise and attention to detail are second to none. Faust Floorings installers craftsmanship are truly the best in Atlanta. I can't recommend them enough.”

Bob B. — 5 out of 5 stars

Contact Us

Request a Free Estimate

Ready to upgrade your floors? Fill out our quick form to receive a complimentary, no-obligation estimate tailored to your project.

Just let us know your square footage and any specific needs, our team will promptly review your details and reach out with a personalized quote. It’s the first step toward a durable, stunning floor you’ll love.

Thank you! Your message has been received.

We'll get back to you as soon as possible.
Oops! Something went wrong while submitting the form.