How long does a polyaspartic floor take to install in Marietta?

Most Marietta garages, driveways, patios and small commercial floors are a one-day job. You can walk on the floor that evening and drive on it within 24 to 48 hours. A large or heavily damaged slab may need a second day for repairs.

Can you work over a weekend so my business stays open?

Yes, and it is how most of our commercial work is scheduled. We grind and coat while you are closed and hand the floor back cured, so trading is never interrupted. Tell us your quiet days and we will build the work around them.

What does a polyaspartic floor coating cost in Marietta?

It depends on square footage, the state of the concrete and how much preparation is needed. A sound slab costs less per square foot than one that has to be degreased, ground and rebuilt first. Estimates are free and itemized in writing.

Do you charge extra to come out to East Cobb?

No. Our shop is in Marietta, so most of Cobb County is a short trip and there is no travel charge on the estimate or on the work itself.

What makes Faust Flooring different from other Marietta floor coating contractors?

More than 20 years installing floors, a shop in the city we are working in, and preparation we will not shorten. We grind every slab instead of acid-etching it, and we will tell you honestly when a less expensive coating is the better option.

Polyaspartic Floor Coating Marietta GA

Floor Coatings for Marietta Homes and Businesses

Two very different customers ask us for the same floor. A family in East Cobb wants a garage that stops shedding dust and finally looks finished. A shop owner two streets away wants a floor that takes a busy Saturday and washes clean on Sunday night.

Polyaspartic answers both, because it is hard enough for commercial traffic and finished quickly enough that neither the household nor the business loses the space for long.

Residential Floor Coatings Across East Cobb

Garages, basements, driveways, patios, porches, walkways and pool surrounds make up the residential concrete we coat in Marietta. Between them they cover almost every call we take from an East Cobb address.

Around East Cobb the housing runs from 1970s ranches through to new builds, so we meet everything from a tired hand-floated slab to concrete poured last year, indoors and out. The system is specified to the surface in front of us rather than off a standard sheet.

You pick the color and the flake blend from a chart before the work starts, and most jobs are finished between breakfast and dinner on the same day.

(770) 419-5864 Get your free quote

Flake floor coating in an East Cobb garage near Marietta

Why Marietta Owners Choose Polyaspartic

Local, and Easy to Reach

Our shop is in Marietta, so booking a visit, coming back to look at something or adding a second area later is all straightforward.

Back in Use Quickly

The coating cures in hours rather than days, so a garage or a shop floor is usable again the same evening. Nobody has to plan a week around it.

Takes Commercial Traffic

The cured surface handles carts, tires, dropped tools and constant foot traffic without chipping or wearing through. It is the same system in a family garage as in a salon, which is why it holds up in both.

Wipes Clean

Seamless and non-porous, so spills sit on the surface instead of soaking in. A mop is usually the whole clean-down.

Choose the Look

Color, flake blend and sheen are all settled at the estimate, whether you want something understated or closer to a showroom floor.

Suits Any Age of Slab

Older Marietta concrete and newer pours both take a coating well, inside the house or out on a driveway or walkway, as long as the preparation is matched to what is actually there. That judgment is made on site, not from a price list.

Book Your Free Marietta Estimate

(770) 419-5864 Get your free quote

How We Coat a Marietta Floor

A coating fails because of what happened before it went on, not because of what came out of the pail. That is why the first day goes on the concrete rather than the color.

Diamond grinding – The slab is ground open with diamond tooling so the coating anchors into the concrete instead of sitting on it.
Repairing the slab – Cracks are cut out and filled, spalled edges rebuilt and low spots brought level before any coating goes down.
Base coat – The base coat is spread across the prepared concrete and works into the profile the grinder has left.
Flake broadcast – Flake is broadcast into the wet base to the density you chose, then scraped smooth once it has set.
Polyaspartic topcoat – The clear topcoat binds the flake in place and provides the hardness, the sheen and the resistance to sunlight and chemicals.

(770) 419-5864 Get your free quote

Diamond grinding a stained Marietta slab before coating

Finished polyaspartic garage floor at a Marietta home

Polyaspartic or Epoxy for Your Marietta Floor

We install both, and both leave a hard, seamless surface over concrete. Polyaspartic belongs to the polyurea family, so you will see the same coating quoted under either name. Set against epoxy, what changes is how fast it cures, how well it holds color and the temperatures it can be applied in.

Polyaspartic is the one to ask for when the floor cannot be out of action, which covers most garages and nearly every trading business.

Epoxy lays down thicker in a single coat and costs less over a large enclosed floor, so it is still the right call for a warehouse or a workshop that never sees daylight.

We will tell you at the free estimate which of the two suits your slab, including the times the cheaper one does the job just as well.

(770) 419-5864 Get your free quote

Commercial Floor Coatings in Marietta

For a small business the floor is usually only free at the weekend, and that is exactly what this system is built around. We can grind on Saturday and hand back a finished floor before Monday.

Around Marietta and East Cobb we coat salon and barber floors, gyms and studios, pet care and grooming rooms, coffee shops and bakeries, clinic corridors, workshops and stockrooms.

Where a floor gets hosed or mopped hard, cove base can be carried up the wall so there is no joint at the bottom for water and dirt to work into.

Tell us your quiet days and how the room actually gets used, and we will fit the work around your trading week. Most of our commercial jobs in Cobb County start on a Friday evening and finish before opening on Monday.

(770) 419-5864 Get your free quote

Commercial floor coating in a Marietta small business

The Concrete We Coat Over in Marietta

Marietta slabs span fifty years of building, so no two jobs start the same way. These are the conditions we come across most often, and what each one needs before a coating goes down.

Hand-floated older slabs

Concrete finished by hand decades ago is often soft at the surface and uneven across the floor. Grinding removes the weak upper layer and takes the high spots down, so the finished coating reads flat rather than following every dip.

Oil and traffic staining

A garage or shop floor that has been worked hard holds oil deep inside the concrete. It gets drawn out and the area degreased before we grind, because nothing bonds reliably over contamination.

Previous coatings and sealers

Old garage paint, a sealer or a resin floor that has started to fail all come off with the grinder. Coating on top of something already lifting just passes the problem straight on to the new floor.

Slabs poured on a fall

Plenty of Marietta garages were poured sloping towards the door so water runs out. We keep that drainage rather than trying to flatten it, and finish the edges so the floor still looks deliberate.

What a Polyaspartic Floor Coating Costs in Marietta

The size of the floor sets a starting figure and not much more. Two Marietta garages measuring the same can be quoted very differently once someone has looked at the concrete.

Prices go up where a slab is stained or spalled, where an old coating has to be removed, where moisture readings call for a specialized primer, and where cove base runs up the wall. They come down on sound concrete with clear access, and where a garage, a patio and a basement are booked together while we are already set up on site.

You get the price in writing and itemized, after someone has stood on the concrete. Being based in Marietta, coming out to look costs us very little, so there is never a reason for us to quote from a photograph.

Looking After a Marietta Polyaspartic Floor

Almost nothing is required of you. Because the surface is continuous there are no joints or pores for dirt to work into, so sweeping through the week and mopping now and then keeps it as it was on the day of handover.

Hot tires will not lift it, oil and brake dust will not stain it, and road salt does it no harm at all. Clearing loose grit before it gets ground underfoot is the one habit that keeps the finish looking new for longer.

Avoid strong solvents and abrasive pads. A damaged area can be recoated on the spot without taking up the rest of the floor, which is worth knowing in a commercial space where one corner always takes the punishment. Coming back to do that is a short job for us, and we are five minutes up the road.

Marietta Polyaspartic Floor Coating Contractors

Faust Flooring has been installing floors throughout Metro Atlanta for more than 20 years from our base in Marietta. Working out of a shop in the city we are coating means shorter trips, easier scheduling and a return visit that is genuinely no trouble.

How a floor coating ends up is mostly decided before the first coat is opened. We prepare concrete mechanically with diamond grinding, assess the state of the slab, and check for moisture or damage before recommending a system.

We would rather be straightforward about the options as well. Where a simpler or less costly coating would serve your space better, that is what we will recommend.

Tell us how the space is used and what you want from the floor. We will visit your Marietta property, inspect the concrete, explain what we recommend, and provide a written estimate at no cost or obligation.

(770) 419-5864 Get your free quote

Faust Flooring polyaspartic floor coating contractors in Marietta, GA

Polyaspartic Flooring in Marietta, GA

Floor Coatings for Marietta Homes and Businesses

Residential Floor Coatings Across East Cobb