Vinyl and LVP Flooring Installation in Alpharetta, GA

VCT Installation

Vinyl composition tile is the hard-wearing commercial floor you have walked across in schools, clinics and back-of-house areas without ever noticing it. It is inexpensive, it takes very heavy traffic, and if a tile is damaged it can be lifted and replaced without redoing the whole room.

Around Alpharetta we install VCT in schools, churches, offices, stockrooms and retail spaces, and occasionally in home gyms, workshops and utility rooms where a floor needs to be tough rather than decorative. The finished result depends almost entirely on the preparation, so we spend the time getting the slab flat, clean and dry before the first tile is laid.

We can work evenings or weekends so an Alpharetta business does not need to close, and we will tell you clearly how long the adhesive needs to cure before the room goes back into use.

Heat-Weld Vinyl Installation

Heat-weld vinyl is sheet flooring with the seams fused together using heat, so the finished surface has no joints for water or bacteria to work into. It is the right floor wherever hygiene genuinely matters and a surface has to be cleaned properly rather than simply mopped.

We install heat-weld vinyl for Alpharetta veterinary clinics, salons, daycares, commercial kitchens and treatment rooms, including coved edges that carry the vinyl up the wall so there is no dirt trap where the floor meets the baseboard. It is a specialist installation and we are glad to walk you through what is involved before you commit.